Metric | Cooler 1: Freezer 36 | Cooler 2: NH-D15 G2 |
---|---|---|
Cooler Name | Freezer 36 | NH-D15 G2 |
Fan 1 Name | P12 PWM PST | NF-A14x25r G2 |
Fan 2 Name | P12 PWM PST | NF-A14x25r G2 |
Manufacture Rated dBa | 24.8 | |
Number of Heat Pipes | 4 | 8 |
Full Size (WxHxD): | 126x159x104 mm | 150x168x152 mm |
Heatsink 1 (WxHxD) | 150x120x55 mm | |
Heatsink 2 (WxHxD) | 150x120x50 mm | |
Air Cooler Rating: Install | 10 (Easy) | 7 (Easy) |
Manufacture's Link | Freezer 36 Manufacture's Link | NH-D15 G2 Manufacture's Link |
Link Type | Cooler 1: Freezer 36 | Cooler 2: NH-D15 G2 |
---|---|---|
Amazon.com |
Metric | Cooler 1 | Cooler 2 |
---|---|---|
Fan Name | P12 PWM PST | NF-A14x25r G2 |
Fan Location | Front | Front |
Fan Flow Type | Push | Push |
CPU Only Fan | No | No |
Max RPM | 1800 | 1500 |
Fan Size (mm) | 120 | 140 |
Fan Width (mm) | 25 | 25 |
Manufacture Rated dBa | 22.5 | 24.8 |
Manufactured Rated Airflow (cmf) | 56.3 | 91.6 |
Manufactured Rated Air Pressure (h2o) | 2.2 | |
Number Of Pins | 4 | 4 |
PWM Fan | Yes | Yes |
Bearing Type | Fluid Dynamic | SSO2 |
Watts (W) | 0.96 | 2.28 |
Current (A) | 0.08 | 0.19 |
Max Volts | 12.00 | 12.00 |
Metric | Cooler 1 | Cooler 2 |
---|---|---|
Fan Name | P12 PWM PST | NF-A14x25r G2 |
Fan Location | Rear | Mid |
Fan Flow Type | Pull | Mid |
CPU Only Fan | No | No |
Max RPM | 1800 | 1500 |
Fan Size (mm) | 120 | 140 |
Fan Width (mm) | 25 | 25 |
Manufacture Rated dBa | 22.5 | 24.8 |
Manufactured Rated Airflow (cmf) | 56.3 | 91.6 |
Manufactured Rated Air Pressure (h2o) | 2.2 | |
Number Of Pins | 4 | 4 |
PWM Fan | Yes | Yes |
Bearing Type | Fluid Dynamic | SSO2 |
Watts (W) | 0.96 | 2.28 |
Current (A) | 0.08 | 0.19 |
Max Volts | 12.00 | 12.00 |
This cooler features an all black design with a single heatsink, two Arctic P12 fans, and a polished top. It offers a clean and polished appearance that's ideal for an all-black setup, which is my preferred build.
This cooler is quite large and showcases Noctua's signature design, appealing to diehard PC builders who don't want to compromise on cooling performance. The NH-D15 G2 closely resembles the previous generation, with a few updates. This version features eight heat pipes and offset depths on the two heatsinks
the Arctic Freezer 36 features a novel way to secure the fan to the cooler. It uses buttons that are pre-installed and attached to the fan to snap into the cooler. This makes the process much easier relative to the main steam method that uses wires that can sometimes bend the heatsink fans. The rest of the installation process follows the industry standard with mounting brackets that secure the cooler to the motherboard. Given it's size, it's much easier to handle than some of the larger dual tower coolers.
The NH-D15 G2 retains the same installation design as its predecessor, with the addition of a new bracket that allows for offset mounting on AM5 CPUs. The installation process is straightforward, guided by clear instructions that adhere to industry standards for top-tier coolers. However, the cooler's large size may pose challenges when maneuvering it within the case.
This cooler is better than many others and runs almost at full speed when cooling high-power CPUs with a lot of use. It works well for medium-level CPUs that produce a moderate amount of heat. However, it might not cool down CPUs very well if they generate a lot of heat.
The Noctua's NH-D15 G2 cooler is hard to beat in terms of cooling performance, even outperforming AIOs from various other brands—a result expected given its larger size. However, when compared to the previous generation, its performance is on par, offering little improvement.
This cooler is relatively quiet, making it perfect for setups where silence is important. Its efficiency in cooling relative to its noise level is matched by very few other coolers.
Compared to the average cooler, the Noctua NH-D15 G2 is louder than most on the market. However, when performance is evaluated on a noise-normalized basis, this cooler is tough to beat, offering excellent cooling for a given noise level. This means you can keep your cooler quiet when needed, while still having the headroom to increase the speed for enhanced cooling performance.
The Arctic Freezer 36 features a novel fan attachment method with pre-installed buttons for easy setup, avoiding the complications of traditional wire methods. Its compact size and standard mounting brackets simplify installation, making it less cumbersome than larger coolers. With an all-black design, single heatsink, and two Arctic P12 fans, it offers a sleek look ideal for all-black setups. This cooler performs well, efficiently cooling high-power CPUs under heavy use, best suited for medium-level CPUs. Despite its effectiveness, it may not handle extremely hot CPUs as well. Its quiet operation is a significant advantage, making it perfect for noise-sensitive environments, standing out for its exceptional cooling-to-noise ratio.
The Noctua NH-D15 G2 retains the familiar installation design of its predecessor, with the addition of a new bracket for offset mounting on AM5 CPUs. While its large size may make installation a bit challenging, the process is straightforward, with clear instructions that meet industry standards. The cooler's substantial size is matched by its performance, offering exceptional cooling that even surpasses many AIOs from other brands. Although its performance is on par with the previous generation, the NH-D15 G2 still delivers excellent cooling, particularly when considering noise levels. Despite being louder than the average cooler, it excels in noise-normalized performance, allowing users to maintain quiet operation while having the flexibility to ramp up speed for maximum cooling when needed.
Metric | Value |
---|---|
Brand | AMD |
Cooler Name | Ryzen 7 5800X |
CPU Socket | AM4 |
Cores | 8 |
Thread Count | 16 |
Max Temperature | 90°C |
Base Clock | 3.8GHz |
Max Boost Clock | 4.7GHz |
Cache L1 | |
Cache L2 | 4MB |
Cache L3 | 32MB |
Processor Power Base | 105W |
Manufacture's Link | Ryzen 7 5800X Manufacture's Link |
Copyright © 2023 · All Rights Reserved ·
Contact: derekleetechtalks@gmail.com · Privacy Policy