Metric | Cooler 1: Liquid Freezer II 240 | Cooler 2: AXP90-X47 Full Copper |
---|---|---|
Cooler Name | Liquid Freezer II 240 | AXP90-X47 Full Copper |
Fan 1 Name | P12 PWM PST | TL-9015R |
Fan 2 Name | P12 PWM PST | |
Manufacture Rated dBa | 22.5 | 22.4 |
Radiator/ (WxHxD) | 120x277x38 mm | 95x22x84 mm |
AIO Cooler Rating: Install | 8 (Easy) | 3 (Difficult) |
Manufacture's Link | Liquid Freezer II 240 Manufacture's Link | AXP90-X47 Full Copper Manufacture's Link |
Link Type | Cooler 1: Liquid Freezer II 240 | Cooler 2: AXP90-X47 Full Copper |
---|---|---|
Amazon.com |
Metric | Cooler 1 | Cooler 2 |
---|---|---|
Fan Name | P12 PWM PST | TL-9015R |
Fan Location | Bottom | Top |
Fan Flow Type | Push | Push |
CPU Only Fan | No | No |
Max RPM | 1800 | 2700 |
Fan Size (mm) | 120 | 92 |
Fan Width (mm) | 25 | 15 |
Manufacture Rated dBa | 22.5 | 22.4 |
Manufactured Rated Airflow (cmf) | 56.3 | 42.6 |
Manufactured Rated Air Pressure (h2o) | 2.2 | 1.3 |
Number Of Pins | 4 | 4 |
PWM Fan | Yes | Yes |
Bearing Type | Fluid Dynamic | Hydraulic |
Watts (W) | 0.96 | 2.16 |
Current (A) | 0.08 | 0.18 |
Max Volts | 12.00 | 12.00 |
Metric | Cooler 1 | Cooler 2 |
---|---|---|
Fan Name | P12 PWM PST | |
Fan Location | Top | |
Fan Flow Type | Push | |
CPU Only Fan | No | |
Max RPM | 1800 | |
Fan Size (mm) | 120 | |
Fan Width (mm) | 25 | |
Manufacture Rated dBa | 22.5 | |
Manufactured Rated Airflow (cmf) | 56.3 | |
Manufactured Rated Air Pressure (h2o) | 2.2 | |
Number Of Pins | 4 | |
PWM Fan | Yes | |
Bearing Type | Fluid Dynamic | |
Watts (W) | 0.96 | |
Current (A) | 0.08 | |
Max Volts | 12.00 |
Highlighted by its captivating ARGB lighting, this cooler presents a streamlined look with a pair of 120-millimeter fans adorning its 240mm radiator. Cable management concerns are efficiently addressed from the start through the pre-daisy-chained ARGB and RPM cords. A seamless blend is achieved with its black radiator, fan frames, and water pipes, tailored to complement darker cooler setups. It's worth noting that the water pump, though possessing a distinctive design, may exhibit a more understated aesthetic when juxtaposed with AIO coolers showcasing more intricate pump designs.
This cooler features a sleek, low-profile design, making it an excellent choice for compact builds where space is a priority. Its copper construction not only enhances thermal performance but also adds a distinctive look that stands out in any setup.
This cooler is relatively easy to install with the fans pre-installed on the radiator with the RPM connectors daisy chained neatly with a single connector coming out of the pump for the Fan inputs. However, this cooler requires it to be offset to the base mount, which can take some time to get right. Additionally, the heat pipes don't pivot from the pump which may make placement in certain setups difficult.
Installing this cooler is more involved than a standard cooler due to its low-profile design, which requires it to be screwed in from behind rather than from the top, as is common with most coolers. While the installation is relatively easy if the motherboard is not yet secured in the case, it can be challenging if you attempt to install it with the motherboard already mounted. Additionally, the cooler's brackets are attached via screws that need to be removed and swapped depending on the CPU you're using.
Despite its compact size, this cooler delivers impressive cooling power through its pair of 120mm fans. It matches the cooling performance of leading air coolers, making it an excellent choice for setups that demand efficient cooling while avoiding the bulkiness of traditional air cooling solutions. However, if you're seeking even higher performance beyond what an air cooler can offer, transitioning to a 360mm setup becomes necessary.
Given its compact size, it’s no surprise that this cooler won’t top the charts in cooling performance. However, it delivers impressive efficiency for its form factor, outperforming stock coolers of similar size.
Operating with near-silent efficiency, the water pump ensures minimal noise disruption, while the pair of 120mm fans provide exceptional airflow at a manageable noise level. Consequently, the cooler excels in delivering impressive cooling performance with barely perceptible noise during typical usage scenarios. Nevertheless, when pushing a high TDP CPU to its limits, the cooler may produce some noise as it copes with the heightened heat load.
With its high-speed 2700 RPM single fan, this cooler has the potential to produce higher noise levels than typical models. However, given its compact size, it's expected to become audible when delivering high-performance cooling.
Enhanced by ARGB lighting, this cooler boasts dual 120mm fans situated on a 240mm radiator, ensuring efficient cooling with discreet black components that complement darker setups. The installation process is made convenient through pre-installed fans and daisy-chained RPM connectors. Despite its compact size, it delivers efficient cooling comparable to premium air coolers; however, for heightened performance demands, a 360mm setup might be better suited. Operating with minimal noise, the water pump and fans collaborate to maintain exceptional airflow at manageable sound levels. During regular use, it offers efficient cooling with a slight noise presence, yet handling high TDP CPUs during intensive tasks may result in increased noise due to elevated heat loads.
This cooler’s sleek, low-profile design makes it an excellent choice for compact builds where space is a priority. Its copper construction enhances thermal performance while adding a distinctive look to any setup. While it won’t compete with larger coolers in raw cooling power, it outperforms stock coolers of similar size. The high-speed 2700 RPM fan can produce noticeable noise under heavy loads, which is expected given its compact form factor. Installation is more involved than standard coolers, requiring mounting from behind rather than from the top, making it easier to install before securing the motherboard in the case. Additionally, its brackets must be swapped depending on the CPU, adding an extra step to the process.
Metric | Value |
---|---|
Brand | AMD |
CPU Name | Ryzen 7 5700X |
CPU Socket | AM4 |
Cores | 8 |
Thread Count | 16 |
Max Temperature | 90°C |
Base Clock | 3.4GHz |
Max Boost Clock | 4.6GHz |
Cache L1 | 512 KB |
Cache L2 | 4 MB |
Cache L3 | 32 MB |
Processor Power Base | 65W |
Manufacture's Link | Ryzen 7 5700X Manufacture's Link |
Copyright © 2023 · All Rights Reserved ·
Contact: derekleetechtalks@gmail.com · Privacy Policy