Compare: Hyper 212 EVO V2 vs Assassin IV

Design and Aesthetics:

Hyper 212 EVO V2

The Hyper 212 EVO V2 has a unique design with its fan bracket, which sets it apart from most other coolers. While this gives it a different look, it also pushes the fan out far enough that it might interfere with the first RAM slot. This shouldn't be an issue if you're only using two RAM slots, but something to keep in mind.

As for the overall feel of the cooler, it seems a bit lighter and cheaper than other coolers of a similar size. This might not be a deal-breaker, but it's worth mentioning.

Assassin IV

This cooler boasts a clean and modern design that sets it apart from other air CPU coolers available today. The entire cooler is tightly put together, which can make it a bit tricky to figure out how to take it apart into its different parts. The middle fan is hidden seamlessly without any visible gaps around it. It comes in an all-black design with DeepCool's signature textured radiator, adding a stylish and modern touch to any setup.

Install Notes:

Hyper 212 EVO V2

It's more difficult than most to install, especially for AMD coolers. The cooler doesn't use the AMD backplate, and its own backplate isn't labeled, making it hard to figure out how to orient it based on the pictures provided. The backplate might feel loose on the motherboard at first, but it should become secure once the cooler is screwed into the mounting system. While the installation is an improvement from the EVO V1, it's still more complicated than most coolers, which can be a turn-off for beginners.

Assassin IV

Installing the Assassin IV is made easier with its smooth setup process. However, because it's small and designed with a lot of details, getting it installed correctly might be a bit tricky if you don't follow the instructions they give you. This cooler uses a bracket that's almost the same as premium coolers and attaches to the motherboard in a way that's like the AK620 model. Figuring out how to put the cooler onto the brackets might be a bit puzzling because its design is so seamless and neat. The top metal mesh that covers the fan sticks on with a magnet, so you can easily access and remove the middle fan during installation. Then, you can attach the cooler to a two-point system and put the middle fan back in place. However, this cooler doesn't put it's fan in the front like most other coolers, so the exposed fan faces the rear. One neat thing is that the fans are already connected, so you only need one plug to turn on both fans and the cooler's LED DeepCool logo. There are additional brackets to potentially add a third fan to the front of the cooler.