Metric | Cooler 1: iCUE H150i Elite Capellix XT | Cooler 2: Assassin IV |
---|---|---|
Cooler Name | iCUE H150i Elite Capellix XT | Assassin IV |
Fan 1 Name | ML120 PRO RGB LED 120MM | Assassin IV Cooler Fan |
Fan 2 Name | ML120 PRO RGB LED 120MM | Assassin IV Cooler Fan |
Fan 3 Name | ML120 PRO RGB LED 120MM | |
Manufacture Rated dBa | 36.5 | 29.3 |
Radiator/ (WxHxD) | 120x397x27 mm | |
Air Cooler Rating: Install | 7 (Easy) | |
AIO Cooler Rating: Install | 7 (Easy) | |
Manufacture's Link | iCUE H150i Elite Capellix XT Manufacture's Link | Assassin IV Manufacture's Link |
Link Type | Cooler 1: iCUE H150i Elite Capellix XT | Cooler 2: Assassin IV |
---|---|---|
Amazon.com |
Metric | Cooler 1 | Cooler 2 |
---|---|---|
Fan Name | ML120 PRO RGB LED 120MM | Assassin IV Cooler Fan |
Fan Location | Bottom | Front |
Fan Flow Type | Push | Push |
CPU Only Fan | No | Yes |
Max RPM | 1600 | 1700 |
Fan Size (mm) | 120 | 140 |
Fan Width (mm) | 25 | 25 |
Manufacture Rated dBa | 25.0 | 29.3 |
Manufactured Rated Airflow (cmf) | 47.3 | 79.1 |
Manufactured Rated Air Pressure (h2o) | 1.8 | 2.4 |
Number Of Pins | 4 | 4 |
PWM Fan | Yes | No |
Bearing Type | Magnetic | Fluid Dynamic |
Watts (W) | 2.89 | 3.60 |
Current (A) | 0.22 | 0.30 |
Max Volts | 13.20 | 12.00 |
Metric | Cooler 1 | Cooler 2 |
---|---|---|
Fan Name | ML120 PRO RGB LED 120MM | Assassin IV Cooler Fan |
Fan Location | Mid | Mid |
Fan Flow Type | Push | Mid |
CPU Only Fan | No | Yes |
Max RPM | 1600 | 1700 |
Fan Size (mm) | 120 | 140 |
Fan Width (mm) | 25 | 25 |
Manufacture Rated dBa | 25.0 | 29.3 |
Manufactured Rated Airflow (cmf) | 47.3 | 79.1 |
Manufactured Rated Air Pressure (h2o) | 1.8 | 2.4 |
Number Of Pins | 4 | 4 |
PWM Fan | Yes | No |
Bearing Type | Magnetic | Fluid Dynamic |
Watts (W) | 2.89 | 3.60 |
Current (A) | 0.22 | 0.30 |
Max Volts | 13.20 | 12.00 |
Metric | Cooler 1 | Cooler 2 |
---|---|---|
Fan Name | ML120 PRO RGB LED 120MM | |
Fan Location | Top | |
Fan Flow Type | Push | |
CPU Only Fan | No | |
Max RPM | 1600 | |
Fan Size (mm) | 120 | |
Fan Width (mm) | 25 | |
Manufacture Rated dBa | 25.0 | |
Manufactured Rated Airflow (cmf) | 47.3 | |
Manufactured Rated Air Pressure (h2o) | 1.8 | |
Number Of Pins | 4 | |
PWM Fan | Yes | |
Bearing Type | Magnetic | |
Watts (W) | 2.89 | |
Current (A) | 0.22 | |
Max Volts | 13.20 |
Experience the ultimate cooling solution with the 360mm RGB Fan AIO Liquid Cooler, boasting three captivating 120mm RGB fans. Enhanced by a sleek black radiator and tubes, this cooler seamlessly fits into your setup while offering customizable brilliance that complements other components. With iCUE compatibility, it effortlessly syncs with other Corsair RGB products, enabling personalized color schemes and effects, all while maintaining top-tier cooling performance. For those seeking both refined style and exceptional cooling, this cooler stands as an exceptional choice.
This cooler boasts a clean and modern design that sets it apart from other air CPU coolers available today. The entire cooler is tightly put together, which can make it a bit tricky to figure out how to take it apart into its different parts. The middle fan is hidden seamlessly without any visible gaps around it. It comes in an all-black design with DeepCool's signature textured radiator, adding a stylish and modern touch to any setup.
This cooler is relatively easy to install and is a typical iCUE AIO install. This cooler has a standard AIO installation where you must screw the fans onto the radiator. In regards to the pump installation, this AIO has four screws that go into the backplate, where the pump can then be placed and secured with screw caps. To swap the cooler for different CPU mounting systems (AMD/Intel) is relatively easy and doesn't require any screws. However, the corsair logo is secured with four hex screws, so it might require additional work to get the logo in the proper direction. When it comes to RGB setup, this AIO requires the use of the Corsair iCUE Commander CORE RGB hub. Additionally, the heat pipes pivot at the pump, which allows for a more versatile installation.
Installing the Assassin IV is made easier with its smooth setup process. However, because it's small and designed with a lot of details, getting it installed correctly might be a bit tricky if you don't follow the instructions they give you. This cooler uses a bracket that's almost the same as premium coolers and attaches to the motherboard in a way that's like the AK620 model. Figuring out how to put the cooler onto the brackets might be a bit puzzling because its design is so seamless and neat. The top metal mesh that covers the fan sticks on with a magnet, so you can easily access and remove the middle fan during installation. Then, you can attach the cooler to a two-point system and put the middle fan back in place. However, this cooler doesn't put it's fan in the front like most other coolers, so the exposed fan faces the rear. One neat thing is that the fans are already connected, so you only need one plug to turn on both fans and the cooler's LED DeepCool logo. There are additional brackets to potentially add a third fan to the front of the cooler.
Metric | Value |
---|---|
Brand | AMD |
Cooler Name | Ryzen 7 7800X3D |
CPU Socket | AM5 |
Cores | 8 |
Thread Count | 16 |
Max Temperature | 89°C |
Base Clock | 4.2GHz |
Max Boost Clock | 5.0GHz |
Cache L1 | 512KB |
Cache L2 | 8MB |
Cache L3 | 96MB |
Processor Power Base | 120W |
Manufacture's Link | Ryzen 7 7800X3D Manufacture's Link |
Copyright © 2023 · All Rights Reserved ·
Contact: derekleetechtalks@gmail.com · Privacy Policy